Bass Bridge Fitting and Tailpiece Replacement | Alcoa #5 Bass

Here is a bass that I fit a bridge on and replaced the tail piece fastiner. The owner Stan M. is in the process of polishing the aluminum to a mirror like finish. I took a couple of quick photos because it looked quite interesting. The bass was made by Alcoa, I believe it's stamped #5 in the "peg" box.

 

DSC00197 DSC00197
DSC00195 DSC00195
DSC00196 DSC00196
 

 


Add your comment

 
 
Ask Us     Site Map     Top     QR Code